Products > Nitek > Nitek VH856 - 8 Port Active Video Balun Hub

Nitek VH856 - 8 Port Active Video Balun Hub

 
 
MSRP: $2,200.00
Bulk CCTV Price: $1,430.00
SKU:
NT-VH856
Stock Status:
Ships in 1-2 Business Days
There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Log in to submit a review
Add Review
Name:
Review:
Rating:
 
 
 
 
 
 
 

(Your browser will be redirected back to this page)
Submit a Review
Related Products
Nitek VH1651M - 16 Port Active Video Balun Hub RJ45 (NT-VH1651M)
MSRP: $3,200.00
Bulk CCTV Price: $2,080.00
Nitek VH856M - 8 Port Active Video Balun Hub RJ45 (NT-VH856M)
MSRP: $2,200.00
Bulk CCTV Price: $1,430.00
Nitek VH456 - 4 Port Active Video Balun Hub (NT-VH456)
MSRP: $1,120.00
Bulk CCTV Price: $728.00
Nitek VH851M - 8 Port Active Video Balun Hub (NT-VH851M)
MSRP: $1,800.00
Bulk CCTV Price: $1,170.00
Nitek VH856 - 8 Port Active Video Balun Hub (NT-VH856)
MSRP: $2,200.00
Bulk CCTV Price: $1,430.00
Nitek VH1651 - 16 Port Active Video Balun Hub (NT-VH1651)
MSRP: $3,200.00
Bulk CCTV Price: $2,080.00
Nitek VH1639 - 16 Port Video Balun Hub (NT-VH1639)
MSRP: $1,550.00
Bulk CCTV Price: $1,007.50
Nitek VH1639M - 16 Port Video Balun Hub RJ45 (NT-VH1639M)
MSRP: $1,550.00
Bulk CCTV Price: $1,007.50
Nitek VH851 - 8 Port Active Video Balun Hub (NT-VH851)
MSRP: $1,800.00
Bulk CCTV Price: $1,170.00
Qty:
 

8 port active video hub with dual outputs, built-in surge suppression, ground loop isolation, gain/loss control, and video detection. Systems operate with other Nitek UTP video equipment including, video transceiver hubs, standard video balun transceivers, active transmitters, or any twisted pair equipped camera.

 

Multi-channel video receiver hubs provide excellent video quality through two video outputs per channel. Twisted pair installations are made with a choice of the standard screw terminal connections, or the modular jack connections featured on the M series. The VH856 can be used on video runs up to 3,000 feet (900 meters) when used with passive transmitters, or distances of up to 6,000 feet (1,800 meters) with the Nitek TT560 active transmitter. These hubs provide superior immunity from noise and interference, even when run in common raceways with AC power.

 

Features:

  • Quality video over ordinary twisted pair cable
  • Built-in surge suppression
  • Built-in ground loop isolation
  • Dual BNC connector output
  • RJ45 jack connector input
  • Convenient access to DIP switches for accurate gain and loss control
  • High immunity to noise and interference
  • LEDs to indicate video detection
  • Highly compact, only one rack unit in height
  • Video can be run in the same cable with telephone, computer signals and power


Wire and Cable Recommendations

Twisted Sender is recommended for use with unshielded twisted pair (UTP) wiring. The systems will operate over wire gauges from 26 AWG through 12 AWG but are optimized for 24 AWG. Category cabling may be used. Individually shielded pairs should be avoided as they drastically reduce the operating range of the systems. Multi-pair cable with an overall shield is acceptable. Video can be operated in the same communication cable coexistent with telephone, computer, control signals, power voltages and other video signals. While video may be routed through telephone punch-down block terminals, any bridge-taps, also called T-taps and any resistive, capacitive or inductive devices MUST BE removed from the pair.




Subtotal: $0.00